Tyre Inflator - Analysis and Buying Guide - 2023
Professional race drivers and their pit crews are notorious for obsessing over their tire pressure because even 1/4 pound one way or another can change the speed of your car. The same goes for the tires on your car. You may not be aiming for the checkered flag, but you want to be safe on the road, and you probably want the best gas mileage possible. Under-inflated tires literally suck the mileage out of your car. Gas prices always go up and down, so every penny counts.
Car Tyre Inflator vary in their maximum psi, which determines what type of tires they can inflate. Also, they vary in their controls, display and other features that will determine how easy it is to put the tires back on lock when ; you are on the side of the road on a cold winter night.
Keep reading; We’ll take you through all the features and aspects to consider on your way to buying the best car Tyre Inflator for you and your family.
Key Considerations
- Psi Limit
Most car Tyre Inflator weigh about 30 or 35 pounds per square inch, or psi, which limits them to inflating car tires, motorcycle tires, inflatable toys, air mattresses, and other small items. Trucks, SUVs, and RVs have tires with much higher pressure requirements, so finding the right Tyre Inflator for the job is crucial.
Many pumps can go up to 100 or even 150 psi. This should be enough for most of the heaviest vehicles in your driveway or garage.
In general, the higher the psi limit, the more expensive the car Tyre Inflator is.
- Size
Most car Tyre Inflator we've seen are about a foot or so on the longest side. They can be easily stored in the trunk of the car or under a seat. Usually, the carrying case that comes with the pump (if there is one) is adequately shaped or fitted, so it doesn't take up any extra space. However, some car Tyre Inflator come with an oversized carrying case that nearly doubles the "size" of the pump in storage.
- Weight
Cigarette lighter-operated car Tyre Inflator are lightweight, typically between 1 and 2 pounds. However, some models weigh 5 pounds or more. If you have difficulty lifting heavy objects, check the weight of any pump you're considering.
- Power Source
Car Tyre Inflator are typically powered by one of two sources: a cigarette lighter or a 120-volt outlet.
>> Cigarette Lighter
Almost all pumps have an electrical cord that plugs into the cigarette lighter socket on the car's dashboard. This means the car has to be running when you... are using the pump. Otherwise, you'll drain your car's battery.
>> Electric Plug
Some of the pumps also include a regular power cord to draw AC power from a standard 120-volt outlet. This is convenient when you're pumping basketballs, soccer balls, air mattresses, and other inflatables with the pump and don't want to start your vehicle.
Characteristic
- Material
Car Tyre Inflator boxes are made of durable ABS plastic, stainless steel, powder-coated steel, or aluminum. If you expect to use your pump regularly, consider a model with a durable case that won't crack or dent after heavy use.
- Colour
Some manufacturers give you a choice of colors. Common options include black, silver, blue, red, green, and yellow. In the event that you have to use your Tyre Inflator on the side of the road, a brightly colored pump will increase your visibility.
- Controls
Most car Tyre Inflator have simple controls that are easy to read and use, even in low light, and some models have backlit LCD screens that display readings clearly. However, a few pumps on the market still use the old non-illuminated circular gauges. These can be difficult to use in low light situations.
- Cable and Hose Length
If the power cord is too short, you could be stranded on the side of the road with a perfectly good pump that you can't use. It's a good idea to measure the distance between your car's cigarette lighter and the tire farthest from it.
Just as limiting — or releasing — is the length of the hose. Although a long power cord may allow you to place the pump right next to the tire, a long hose is still convenient.
When considering the total reach of a pump, add the total length of the cord and hose. Most power cords are around 10 feet long, while hoses average around 2 feet in length.
- Transport Case
Carrying cases are standard for most Tyre Inflator. However, some cheaper models may come without a carrying case. Before you take out the bag, check that the pump you buy includes a case. It's hard to get an aftermarket case that fits, while the included cases are usually of adequate shape. Carrying cases are usually made of soft polyester or denim.
Additional Characteristics
When comparing mid-range and high-end car Tyre Inflator, you'll start to find additional features that will make tire inflation easier.
A flashlight, often in the form of powerful, long-lasting LEDs, can help you find the stem if your tire lights up.
Some models may include additional nozzles to inflate more than just car tires.
More expensive models may include a built-in tire gauge so you can measure tire pressure before you start filling.
Tips
Unless your tire is obviously flat, check the pressure before removing the pump from the tire. If your car is driving strangely, there could be other issues besides the tires. Eliminate the possibilities one at a time.
Your car has to be running before you plug in the Tyre Inflator. Plug in the power cord, and then connect the pump to the tire stem.
Use the controls to preset the desired tire pressure and then press “start” or “on.” The pump will automatically stop once it reaches the correct tire pressure.
You can expect your tires to lose pressure when the temperature drops as the air in the tires becomes denser.
Read More :